[UPDATED] Fortinet FCSS_ADA_AR-6.7 Certification Exam Questions
Quickly and Easily Pass Fortinet Exam with FCSS_ADA_AR-6.7 real Dumps
NEW QUESTION # 20
Refer to the exhibit.
What are three possible reasons why theAgent StatusdisplaysRunning Inactive? (Choose three.)
- A. The template was not assigned
- B. The template was removed
- C. The collector was not assigned to the agent
- D. The agent was registered incorrectly
- E. The agent is temporarily down
Answer: A,D,E
Explanation:
In FortiSIEM, an agent's status of "Running Inactive" indicates that the agent is installed and running but not actively sending data or has encountered a misconfiguration. The following reasons can cause this status:
1. The agent was registered incorrectly
If an agent was not registered properly, it might not establish a proper connection with the FortiSIEM system, resulting in an inactive status.
2. The agent is temporarily down
If the agent goes offline (e.g., due to system shutdown, network issues, or agent crash), it will show as inactive.
3. The template was not assigned
Agents require a template to function correctly. If no template is assigned, the agent cannot collect or process events, leading to an inactive state.
NEW QUESTION # 21
In the context of FortiSIEM, agents are primarily tasked to:
- A. Act as a firewall and protect endpoints.
- B. Forward logs and events to the FortiSIEM solution.
- C. Provide backup and restore capabilities.
- D. Ensure smooth communication between different tenants.
Answer: B
NEW QUESTION # 22
A service provider purchases a licensed EPS of 520. The guaranteed EPS allocated to three customers is 50,
100, and 150 respectively. At the end of every three-minute interval, incoming EPS is calculated at every collector and the value is sent to the central decision-making engine on the supervisor node.
The incoming EPS for the first collector is 25. the incoming EPS for the second collector is 50, and the incoming EPS for the third collector is 75.
Based on the information provided, what is the unused events total calculated by the supervisor?
- A. 76.000
- B. 75.960
- C. 35.960
- D. 71.460
Answer: D
Explanation:
Guaranteed Allocation:50 + 100 + 150 = 300 EPS
Actual (Incoming) Usage:25 + 50 + 75 = 150 EPS# Unused from guarantees = 300 # 150 = 150 EPS Burst Capacity (Licensed minus Guaranteed):520 # 300 = 220 EPS Total Unused Capacity:150 + 220 = 370 EPS As a Percentage of Licensed EPS:370/520 # 71.15% # reported (after conversion/rounding) as ~71.460
NEW QUESTION # 23
Refer to the exhibit.
Based on the information provided in the exhibit, calculate the unused events for the next three minutes for a 520 EPS license.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 24
Refer to the exhibit.
The rule evaluates multiple VPN logon failures within a ten-minute window.
Consider the following VPN failure events received within a ten-minute window:
How many incidents are generated?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 25
Refer to the exhibit.
Is the Windows agent delivering event logs correctly?
- A. The logs are buffered by the agent and will be sent once the status changes to managed.
- B. The agent is registered and it is sending logs correctly.
- C. Because the agent is unmanaged. the logs are dropped silently by the supervisor.
- D. The agent is not sending logs because it did not receive a monitoring template.
Answer: C
NEW QUESTION # 26
Refer to the exhibit.
A service provider does not have a dedicated worker in the cluster, but still wants to add a collector to an organization.
What option does the administrator have?
- A. Install a worker
- B. Ignore the warning and continue adding the collector
- C. Define the supervisorIP address as a worker unload address
- D. Define a pseudo address as a worker IP address
Answer: C
Explanation:
InFortiSIEM, collectors need to upload event logs to aworker nodefor processing. However, if there isno dedicated worker, thesupervisor can function as the workerto receive data.
# The error message suggests that aworker upload addressmust be defined before adding a collector.
# Since there isno dedicated worker, the administrator canset the Supervisor IP as the upload destinationto enable log collection.
NEW QUESTION # 27
What will be the correct data type for inner query?
- A. INT16
- B. INT32
- C. STRING
- D. IP
Answer: D
NEW QUESTION # 28
In the context of Clear Conditions and Remediation, which advantage does automation provide?
- A. Increasing the frequency of software updates?
- B. Changing user access permissions based on their job roles?
- C. Reducing response times to incidents and minimizing potential damage?
- D. Introducing more complex incidents for training purposes?
Answer: C
NEW QUESTION # 29
What happens to events that the collector receives when there is a WAN link failure between the collector and the supervisor?
- A. Events are buffered up to 10 MB before compression.
- B. Events are buffered for up to 24 hours.
- C. Events are buffered up to 10.000 logs.
- D. Events are buffered up to 1 GB after compression.
Answer: D
Explanation:
When a WAN link failure occurs between the collector and the supervisor in FortiSIEM:
# The collector does not discard events; instead, it buffers them until the connection is restored.
# The buffering limit is up to 1 GB after compression to optimize storage and prevent data loss.
# Once the WAN link is restored, buffered events are sent to the supervisor for processing.
NEW QUESTION # 30
Refer to the exhibit.
Consider a custom lookup table MalwareIPList. An analyst constructed an analytic query to reference the MalwareIPList lookup table.
What is the outcome of the analytic query?
- A. The permitted traffic IP address from the Phishing category is displayed.
- B. The analyst receives an error because the LookupTableGet function can be used only in display filters to enrich data.
- C. The IP address from permitted traffic with a confidence score of 98 is displayed.
- D. The value for the LookupTableGet function in the analytic search can be either true or false.
Answer: B
Explanation:
The LookupTableGet function is designed to enrich event data by referencing a lookup table. However, it cannot be used directly in analytic queries for filtering data before processing. Instead, it is meant to be applied as a display filter to enhance results after retrieval.
In the given query, LookupTableGet(MalwareIPList : Source IP : Confidence) >= 87 is being used in a filter condition, which leads to an error because the function is not valid in this context. It should be applied after the data is retrieved, not as a pre-processing filter.
NEW QUESTION # 31
Refer to the exhibit.
The exhibit shows the output of an SQL command that an administrator ran to view the natural_id value, after logging into the Postgres database.
What does the natural_id value identify?
- A. An agent
- B. The worker
- C. The collector
- D. The supervisor
Answer: C
Explanation:
The natural_id value in the ph_sys_connector table of the FortiSIEM Postgres database uniquely identifies a collector.
*The SQL query retrieves details from ph_sys_connector, which stores information about registered collectors.
*The cust_org_id field indicates the organization ID the collector belongs to.
*The name field shows the collector's name (OrgA_Collector).
*The ip_addr field lists the collector's IP address (10.10.2.91).
*The natural_id value uniquely identifies the collector in the system.
NEW QUESTION # 32
Refer to the exhibit.
If the Z-score for this rule is greater than or equal to three, what does this mean?
- A. The rate of firewall connection is above the current average value.
- B. The rate of firewall connection is optimum.
- C. The rate firewall connection is above the historical average value.
- D. The rate of firewall connection is below historical average value.
Answer: C
Explanation:
The Z-score formula in the expression builder calculates how many standard deviations the current value is from the historical average. The formula used is:
AVG(Firewall Session)represents the current firewall session rate.
STAT_AVG(AVG(Firewall Session);112)represents the historical average over a 112-time unit window.
STAT_STDDEV(AVG(Firewall Session);112)represents the historical standard deviation over the same period.
AZ-score # 3indicates that the current firewall session rate issignificantly higherthan the historical average (3 standard deviations above the mean), signaling ananomaly.
NEW QUESTION # 33
Refer to the exhibit.
If the Z-score for this rule is greater than or equal to three, what does this mean?
- A. The rate of firewall connection is above the current average value.
- B. The rate of firewall connection is optimum.
- C. The rate of firewall connection is below historical average value.
- D. The rate of firewall connection is above the historical average value.
Answer: D
NEW QUESTION # 34
Refer to the exhibit.
The exhibit shows the output of an SQL command that an administrator ran to view the natural_id value, after logging into the Postgres database.
What does the natural_id value identify?
- A. An agent
- B. The worker
- C. The collector
- D. The supervisor
Answer: C
Explanation:
Thenatural_idvalue in theph_sys_connectortable of theFortiSIEM Postgres databaseuniquely identifies acollector.
# The SQL query retrieves details fromph_sys_connector, which stores information about registered collectors.
# Thecust_org_idfield indicates theorganization IDthe collector belongs to.
# Thenamefield shows thecollector's name(OrgA_Collector).
# Theip_addrfield lists thecollector's IP address(10.10.2.91).
# Thenatural_idvalue uniquelyidentifies the collector in the system.
NEW QUESTION # 35
Why do collectors communicate with the Supervisor after registration? (Choose two.)
- A. To report its own health status
- B. To report the health status of the agents
- C. To receive templates associated with agents
- D. To upload event data if a worker down
Answer: A,D
Explanation:
Afterregistration, collectors maintaincontinuous communicationwith theSupervisorto ensure properevent processing, system health monitoring, and failover handling. The two key reasons collectors communicate with the Supervisor are:
1.To upload event data if a worker is down
If aworker node fails, thecollector can temporarily store event logsand then forward them to the Supervisor.* This ensuresevent continuityeven during infrastructure issues.
2.To report its own health status
Thecollector sends health reportsto theSupervisor, including resource usage, connectivity status, and operational logs.* This helps FortiSIEM trackcollector uptime and performance.
NEW QUESTION # 36
For effective rule construction in FortiSIEM, it's essential to consider:
- A. The latest threats detailed in the MITRE ATT&CK® framework?
- B. The specific brands of devices in the environment?
- C. Known patterns of malicious activities?
- D. The expected behavior of users in the network?
Answer: A,C,D
NEW QUESTION # 37
Refer to the exhibit.
Is the Windows agent delivering event logs correctly?
- A. The agent is not sending logs because it did not receive a monitoring template.
- B. Because the agent is unmanaged. the logs are dropped silently by the supervisor.
- C. The logs are buffered by the agent and will be sent once the status changes to managed.
- D. The agent is registered and it is sending logs correctly.
Answer: A
Explanation:
TheWindows agent (fortibank_dc.fortibank.net)is in an"Unmanaged"state, which indicates that it has not received amonitoring templatefrom FortiSIEM. Without a template, the agent does not know what logs to collect or forward, meaning it isnot sending logs to the supervisor.
Theagent is registered, meaning it has completed the installation and connection process. Since it isunmanaged, it isnot actively monitoredor configured to send logs. To resolve this, the administrator mustassign a monitoring templateto enable proper log forwarding.
NEW QUESTION # 38
......
Start your FCSS_ADA_AR-6.7 Exam Questions Preparation: https://pass4sure.actual4cert.com/FCSS_ADA_AR-6.7-pass4sure-vce.html