New 2023 Guaranteed Success with Actual4Cert NS0-516 Dumps Network Appliance PDF Questions
Exceptional Practice To NetApp Implementation Engineer SAN Specialist E-Series (NCIE) Pass the First Time
The NS0-516 exam is a comprehensive test that covers a wide range of topics related to NetApp E-Series SAN solutions. NS0-516 exam focuses on testing candidates' knowledge of SAN implementation, configuration, and troubleshooting. It also covers topics related to data storage, data protection, and disaster recovery.
NEW QUESTION # 24
Exhibit:
Which fiber cable end shown in the exhibit is supported on a NetApp E-Series system?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 25
Exhibit:
Referring to the exhibit, which three steps would you take to solve the problem shown in the event log? (Choose three.)
- A. Move the connection to another controller port
- B. Swap out the HBA on the FC switch
- C. Swap out the SFP in the controller port
- D. Reinitialize the FC switch
- E. Swap out the FC cable
Answer: C,D,E
NEW QUESTION # 26
When you replace a component, why should you wait for the action to register in the storage manager?
- A. To ensure that the host OS completes SOD processing
- B. To ensure that the storage manager completes the component repair sleep cycle
- C. To ensure that the administrator has time to complete ESD procedures
- D. To ensure that the controller configuration database has a record of the change
Answer: D
NEW QUESTION # 27
Which file contains the configuration for a multipath driver for FC on Linux systems?
- A. /etc/multipath.conf
- B. /etc/dm-multipath.conf
- C. /etc/kernel/mp.conf
- D. /opt/multipath/multipath.cnf
Answer: A
NEW QUESTION # 28
Is this E5624 storage system cabled according to recommended practices? If not, why?
- A. No. The controllers should be cabled to the last disk shelf first.
- B. Yes. The cabling configuration is correct.
- C. No. Controller A should be cabled to the right ESMs, instead of the left ESMs and Controller B should be cabled to the left ESMs instead of the right ESMs.
- D. No. Each controller is only cabled to one set of ESMs in the disk shelves.
Answer: D
NEW QUESTION # 29
Exhibit:
Referring to the exhibit, what is the total number of ALUA paths from the host to a volume on the EF280?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 30
What is SMAgent? (Choose the best answer.)
- A. a host I/O performance modeling interface
- B. inter-process communication that supports computer program subroutines
- C. an OS-dependent collection of utilities for servers attached to SANtricity-managed storage systems
- D. a GUI or CLI run on a host server used for storage system management
- E. a host server process that enables storage system management with the storage data path
Answer: E
NEW QUESTION # 31
A customer wants to manage an E-Series system over a secure connection between the system and a server. During implementation, you are asked to fulfill this installation requirement.
In this scenario, which three actions are required to complete this task? (Choose three.)
- A. Disable all the system's local user roles except admin
- B. Disable the legacy management interface on the system
- C. Import certificate authority signed certificates into the system
- D. Import the system's self-signed certificates into the system
- E. Complete the certificate signing request on the system
Answer: B,D,E
NEW QUESTION # 32
What is the SANtricity Client? (Choose the best answer.)
- A. A host server process that enables storage system management with the storage data path
- B. An OS-dependent collection of utilities for servers attached to SANtricity-managed storage systems
- C. Inter-process communication that supports computer program subordinates
- D. A GUI or CLI run on a host server used for storage system management
- E. A host I/O performance modeling interface
Answer: B
NEW QUESTION # 33
What SANtricity package(s) must be installed on a Windows server when it is acting as both a data host and a storage management host?
- A. The client
- B. The client, failover driver, and agent
- C. The client, agent, and utilities
- D. The client and agent
Answer: B
NEW QUESTION # 34
On all the drives, which reserved region stores configuration information? (Choose the best answer.)
- A. DACstore
- B. Partition table
- C. Disk label
- D. Volume header
- E. NVSRAM
Answer: A
NEW QUESTION # 35
Exhibit:
Referring to the exhibit, which three statements are true? (Choose three)
- A. There are two Base-T iSCSI ports available
- B. There are four SAS host ports available
- C. There are six SAS host ports available
- D. There are two FC/iSCSI host ports available
- E. There are two SAS expansion ports available
Answer: B,D,E
NEW QUESTION # 36
What are two methods for setting the host protocol configuration on the E2800 controller with a 4-port 16Gbps FC or 10Gbps iSCSI SFP+ host interface card (HIC)? (Choose two)
- A. Set in the hardware tab using SANtricity System Manager
- B. Set at the factory based on the order.
- C. Change the feature pack in the SANtricity System Manager.
- D. Change the QSFP type in the HIC
Answer: C,D
NEW QUESTION # 37
What is a NetApp best practice recommendation for the system monitor?
- A. It should run only on Windows server systems.
- B. It should be stopped during a controller firmware upgrade.
- C. It should run on all storage manager clients.
- D. It should run only on one management server connected to the storage system.
Answer: D
NEW QUESTION # 38
What is the 'base' host connectivity provided by the E5500 Controller? (Choose the best answer.)
- A. iSCSI
- B. FC
- C. IB
- D. iSCSI
- E. SAS
Answer: B
NEW QUESTION # 39
Exhibit button.
Referring to the exhibit, what is the reason for the errors that are shown on port 5 on the switch of one of the fabrics?
- A. wrong switch configuration
- B. faulty SFPs, cables, or patch panels
- C. twisted cables, wrong plugs, or cable material
- D. protocol errors, encoding errors, or conversion errors
Answer: D
NEW QUESTION # 40
If you have to replace the battery on a controller, you should put the controller into which state?
- A. service mode
- B. quiesced
- C. lockdown
- D. suspend
Answer: A
NEW QUESTION # 41
What are two base host connectivity selections that are provided by the E2800 controller? (Choose two.)
- A. iSCSI
- B. FC
- C. IB
- D. SAS
Answer: A,B
NEW QUESTION # 42
The out-of-band connection is an Ethernet connection from the storage manager host to the LAN, and from the LAN to which location?
- A. port E of the controller
- B. port 1 of the I/O host
- C. port 2 of the ESM
- D. port 1 of the controller
Answer: D
NEW QUESTION # 43
Where can you enter scripts in the SANtricity user interface?
- A. In the AMW on the Setup tab
- B. In the AMW on the Storage & Copy Services tab
- C. In the EMW on the Setup tab
- D. In the EMW on the Devices tab
Answer: D
NEW QUESTION # 44
Barring a specific instruction from technical support or in the release notes, what software should be upgraded or installed first?
- A. ESM firmware
- B. SANtricity client
- C. Disk firmware
- D. Controller firmware
Answer: B
NEW QUESTION # 45
Which two errors would fail a pre-upgrade health check? (choose two.)
- A. I/O is being processed
- B. Volumes are reported on a non-preferred path
- C. An excess number of event log events are present
- D. Hot spares are in use
Answer: C,D
NEW QUESTION # 46
......
NS0-516 EXAM DUMPS WITH GUARANTEED SUCCESS: https://pass4sure.actual4cert.com/NS0-516-pass4sure-vce.html